| One of the original KDI's sailing in Maine. |
November at the Studio
Progress on mkII Deer Isle Koster
The new KDI kit in CAD file view
Files and plans are in the last week or two of development for the KDI, mkII. I am taking orders for kits and plans. There are four excited builders waiting for them to arrive. Won't you join them!?
Many want to know the changes from MkI. Mainly, the boat has been brought back up to the original 5'10" beam that Bruce drew on the original KDI's. Another change is that the nearly flat garboards and solid wood keel have been replaced by a piece of 3/8" plywood and the first two planks. The joints are glassed and the bottom sheathed (see hatch markes in picture below). This will make building simpler and alow the builder to make a very durable bottom for beaching. The mk II wll be roomier inside and I expect it to have faster off-wind speeds. The specs for the new KDI are below.
KDI SPECS
LOA 14'
BEAM 5'10"
LWL 12'5"
Beam WL 51 1/4"
draft 5"
Displace. 595 lbs
Sail area 97 SF
KDI Design Project
Happy September!
Late Summer Update and Announcement
| Drake Raceboat in perspective (more screenshots below) |
- A fast rowboat in the Drake spirit optimized for single, fixed- or sliding-seat rowing
- Ideal for fitness rowing and the open water racing curcuit
- 18'3" LOA (kit) stretchable up to 20' by spacing out molds (plans)
- Waterline length almost 17', 27 1/2" waterline beam
- Max beam is set at 4' so boat can be rowed in fixed seat class with 8 1/2' oars
- Sliding seat is an equal option in this boat, the Poseidon rig being the ideal, using sculling length oars
- Oarlocks for sliding seat can be mounted using Shaw and Tenney oarlock brackets or a custom made outrigger that fastens to gunwales (TBD)
- 5 kts speed potential race pace with 6kts in sprints
- Flotation tanks optional in sides or ends, but more likely flotation bags will be used and canvas decks to shed water
- Glued lapstrake construction, 4 strakes per side (4mm), no fiberglass
- Estimated weight below 75 lbs at kit length
- Numbers from computer model"
Volume Displacement = 306 lbs
Center of Buoyancy = 53.9% aft
Wetted Surface Area = 27.74 sf
Waterline Length = 16' 11 1/2"
Maximum Waterline Beam = 27.6781"
Water Plane Area = 24.5 sf
Center of Floatation = 53% aft
MSA 70.1711896 (+/- 1e-08) square inches
| More screenshots from the computer model of the DRB |
Design Projects
Sponsorship and Commission Opportunities
| The hull lines for the new KDI sketched out. |
| The Drake Raceboat has been modeled in the computer but that is it until sponsorship comes along. |
