Maine

New Boat: CIY 16

The Calendar Islands Yawl 16

A Sail-and-Oar Dinghy for one or two people



The CIY 16 began as a 19 x 6 1/2-foot daysailer design with a deck and coaming with a bit of Herreshoff flavor. A friend who sails the Goat Island Skiff design by Michael Storer wanted a similar boat -- singlehanding, lightweight, lug rigged sail-and-oar dinghy -- but with a hull shape more amenable to Maine waters. I immediately thought of my CIY lines that I had drawn years ago and that had been sitting untouched and in need of inspiration. I had already put the lines into the computer so I scaled them down and reworked them to make this hull. The specs are:

LOA 15 1/2'
Beam 5' 1"
Displacement ~522lbs
Depth amidships 1'9"
DWL is 3'10" x 13'2"
Cp is 0.54


The hull has a wide plank keel for rolling the boat up and down the beach. The skeg is there for tracking under oars, but the cutaway allows the stern to come through the wind when tacking. The lines are fairly straight forward and full aft. In a breeze she will plane. Yet trimmed on her DWL, the transom is out of the water and the stem is in the water and she'll row fine with 10' oars so long as we keep her light. Construction will be 1/4" plywood: bottom and garboard stitch and glue style, with lapstrake sides, about 5 strakes total for topsides.



It's always fun designing something really new. The next steps are to put in all the planks in the model so look forward to that post. I'll be looking for someone to prototype the boat. Let me know if you are interested. Stay tuned!

Maine BoatBuilders Show

c0df05e8

Here is a boat moving in for the Show....it is that time of year again. The Maine Boatbuilders Show started Fri and tomorrow is day 3 already. This year has been a good show so far and tomorrow should bring even more interest. People are really intrigued by what I have to offer, a couple dozen truly unique boat kit designs most of which are available only through CCBB!

This is the first time a Goat Island Skiff has been displayed at a US boat show as far as I can tell and people are loving the boat. My boat is still unpainted, but there are always a few boats at this show that are in progress, which makes it a lower key boat show. The philosophy behind this show is that it is a boatbuilders show. People talk to the boatbuilders not reps and, in the case of an unfinished boat, get a rare glimpse into the workings of a boatbuilder, work that is normally inside a shop until it is all painted.

Set up day at MBB Show 2011

Lastly, we are live on FACEBOOK and TWITTER. Like us on Facebook



Top 5 Thanksgivings at Clint Chase Boatbuilder

We are certainly thankful at CCBB for five big things:

#1: The new shop. The goal by the time we were sitting down for turkey was to be in the new shop and pretty well set up so we could get back to customers' projects with as little delay as possible. We are a few days off the goat but still pretty darn thankful for this 1100 SF space where we'll be able to build above 30' or have multiple smaller boats in construction, or new construction and a prototype, or one big boat, mastmaking, and oarmaking all happening under one roof for the first time.

New Shop
The new shop on moving in day October 1st

#2: Our customers. We wouldn't be here without them. A handful now are out there building our boats around the States, from Maine to Washington, Montana to Texas. Thanks to those who have helped me start out and who help me keep on!

#3: The designers we contract with have been key to our success and I thank all of them: Francois Vivier, Michael Storer, Bruce Elfstrom, Eric Risch, Ruud Van Veelen, Rodger Swanson, Roger Long, and all those who have helped contribute to our grand plan.

#4: Casco Bay and Maine: Though we are in a semi-industrial, urban neighborhood, it is but a 3 minute ride to the ramp that accesses the most beautiful waters in the Northeast. I am very thankful to have access to these parts, the islands, the open ocean and the memorable rows and sails we've had.

Fort Gorges in Portland Harbor
Fort Gorges in Portland Harbor


#5: Of course my family who have been unbelievably supportive in my ventures, not the least of which is starting our business building beautiful boats, spars, oars and selling boat kits to others whose dream it is to build their own boat.

Drake with Kids
Drake and kids in Flanders Bay, Maine

Invitation to Fall Shop Talk & Messabout in Portland, Maine




Please join me for the 2nd annual – “It’s a tradition now” – shop talk and messabout. This year we’ll welcome our guest designer/builder Walter Wales. Also with him will be WoodenBoat’s Associate Editor Karen Wales (Walter’s wife) and renowned illustrator Sam Manning and his wife Susan.

Walter is an acknowledged expert on the Marblehead Gunning Dory originally built by Will Chamberlain of Marblehead, Massachusetts. Sam illustrated John Gardner’s “Dory Book”

Walter and Karen will bring their Gunning Dory REPUBLICAN, built in 1960 by Capt Gerald Smith from Will Chamberlain’s molds.

Walter and Sam will talk about the history, design, construction, and use of this famous dory type. In addition to REPUBLICAN we’ll have a couple other dories on site to look at and discuss.

You can read about the Marblehead Gunning Dory in John Gardner’s books, “The Dory Book” and “Wooden Boats to Build and Use.”

Bring a boat because afterward we’ll head to East End for a sailing and rowing Messabout. Snacks and drinks provided in the shop, but bring a lunch

WHAT: 2nd Annual Shop Talk & Messabout

WHERE: 25 Deblois Street Portland, Maine. Deblois is off Brighton Avenue

WHEN: Saturday, Oct 23rd 11am. Messabout after lunch. Sunday rain date (stay posted on my blog for weather update)

MAP: http://tinyurl.com/ClintShop

CCBB Blog ClintChaseBoatbuilder.blogspot.com